湖北山德机械有限公司
湖北山德机械有限公司
全自行走剪叉式高空作业平台全自行走剪叉式高空作业平台是一种多功能起重装卸机械设备
| 型号 规格 Model Number | FSJY0608 | FSJY0810 | FSJY1012 | FSJY1214 | ||
| 工作高度Maximum working height | mm | 8000 | 10000 | 12000 | 13800 | |
| 平台高度Maximum platform height | mm | 6000 | 8000 | 10000 | 11800 | |
| 收起时高度（栏杆立起）Folding maximum height(guardrail unfolding) | mm | 2150 | 2275 | 2400 | 2525 | |
| 收起时高度（栏杆拆除）Folding maximum height(guardrail removed) | mm | 1190 | 1315 | 1440 | 1565 | |
| 整机长度Overall Length | mm | 2400 | 2400 | 2400 | 2400 | |
| 整机宽度Overall Width | mm | 1150 | 1150 | 1150 | 1150 | |
| 工作平台尺寸Platform Size | mm | 2270×1150 | 2270×1150 | 2270×1150 | 2270×1150 | |
| 工作延伸尺寸Platform extend size | mm | 900 | 900 | 900 | 900 | |
| 最小离地间隙（收拢状态）Minimumground clearance(folding) | mm | 110 | 110 | 110 | 110 | |
| 最小离地间隙（起升状态）Minimumground clearance(rising) | mm | 20 | 20 | 20 | 20 | |
| 轴距Wheelbase | mm | 1850 | 1850 | 1850 | 1850 | |
| 最小转弯半径（内轮） Minimum turn radius(inner wheel) | mm | 0 | 0 | 0 | 0 | |
| 最小转弯半径（外轮） Minimum turn radius(outer wheel) | mm | 2100 | 2100 | 2100 | 2100 | |
| 动力源Power source | v/kw | 24/3 | 24/3 | 24/3 | 24/3 | |
| 机器行使速度（收拢状态）Running speed(folding) | km/h | 3.5 | 3.5 | 3.5 | 3.5 | |
| 机器行使速度（起升状态）Running speed(rising) | km/h | 0.8 | 0.8 | 0.8 | 0.8 | |
| 上升/下降速度Rising/falling speed | sec | 40/50 | 40/50 | 70/80 | 70/80 | |
| 蓄电池Battery | V/Ah | 4×6/210 | 4×6/210 | 4×6/210 | 4×6/210 | |
| 充电池Charger | V/A | 24/25 | 24/25 | 24/25 | 24/25 | |
| 爬坡能力Maximum climbing ability | % | 20 | 20 | 20 | 20 | |
| 工作允许角度Maximum working allowable angle | / | 2-3° | 2-3° | 2-3° | 2-3° | |
| 控制方式Way of control | / | 电液比例控制Electro-hydraulic proportion control | ||||
| 驱动Driver | / | 双前轮Double front-wheel | ||||
| 液压制动Hydraulic drive | / | 双后轮Double rear-wheel | ||||
| 轮台尺寸（实心）Wheel size(stuffed&no mark) | / | Φ381×127 | Φ381×127 | Φ381×127 | Φ381×127 | |
| 额定载荷Whole weight | kg | 300 | 300 | 300 | 230 | |
| 整体重量Lifting capacity | kg | 1900 | 2080 | 2490 | 2760 | |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
物流技术网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
