设计时采用高式进气,有效的防止了灰尘的进入,提高了发动机的进气质量,延长了发动机的寿命。驱动桥变矩比大,效率高、结构简单、维修方便可据客户要求设计2-6米起升高度各级门架,扩展作业范围,提高作业效率。采用动力换档,减少司机的劳动强度,操纵轻便、灵活。微动踏板的设置,延长摩擦片寿命.
型 号(model) 参数(parameters) | FD80TJ/CPCD80C | |
额定起重量 Kg Rated capacity | 8000 | |
载荷中心距 mm Load center | 600 | |
zui大起升高度 mm max lifting high | 3000 | |
zui大起升速度 mm/smax lifting speed(laden) | 380/310 | |
门架倾角 前/后 度the angle fwd/bwd degree | 60/120 | |
zui小转弯半径 mmMin.outside turning radius | 3700 | |
货叉自由提升高度 mmfork free lift height | 200 | |
动力装置 power system | 柴油机diesel engine | |
发动机型号 engine model | ISUZU6BD1/6102G4 | |
额定功率 KW rated power | 75 | |
额定功率时转速 r.p.mspeed at rated output | 2050/220 | |
zui大扭矩 max.torque | 376/353 | |
zui大扭矩时转速 r.p.mspeed at max torque | 1600 | |
行驶速度 | 前进 Km/h forward | 0-29/0-26 |
后退 Km/h backword | 0-29/0-26 | |
轮胎 | 前轮 front-wheel | 9.0-20-14PR |
后轮 rear wheel | 9.0-20-14PR | |
外形尺寸 | 长x宽x高 mm length*width*high | 5120X2165X2700 |
自重 Kg service weight | 10850/11020 |