深圳市汉斯福特科技有限公司
深圳市汉斯福特科技有限公司
MeasuringRangeinSteel0
Measuring Range in Steel
0.025 - 6.00 inches
0.60 - 150.0 mm
The new CHECK-LINE TI-25DL accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The Checkline TI-25DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
5 year warranty The gauge can be used in a Single Thickness Reading mode or in two alternative modes, the Scan mode and the and the Differential mode. The Scan modes permits the user to "drag" the probe over a large measuring area where the minimum thickness encountered during the scan will be displayed. The Differential mode displays the difference ("+" or "-") from a set "nominal" value
Resolution of 0.001" (0.01 mm)
Selectable units of inch or mm
Large, backlit LCD display retains last reading
RS-232C Serial output for downloading stored data to a printer or computer
Memory for 1000 data points in up to 10 batches
Special-purpose probes are offered for a variety of applications
Windows compatible data transfer program supplied at no additional cost.
CE Certified
Includes NIST-Traceable Calibration Certificate
Made in the USA
IP 65 Rated
Range in Steel | 0.025-6.00" (0.60-150.0 mm) |
Resolution | .001" (0.01 mm) |
Velocity Range | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
Display | 4½ - Digit, 0.5" Backlit LCD |
Probe | 7.5 MHz, 0.25" Diameter (6.35 mm) |
Probe Wearface | PEEK (Polyethlethylketone) |
Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
Serial Output | RS-232C (8, N, 1, user-set baud rate) |
Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) |
Battery Type | Two AA batteries |
Battery Life | 200 hours |
Weight | 7 ounces (196 g) |
Size | 2.5 x 4.5 x 1.25" |
Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
Warranty | Gauge: 5 Years |
订货清单
The TI-25DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, RS-232 output cable, RS-232 to USB adapter and Operating Instruction Manual - all in a foam-fitted carrying case.
配件
TICC-M Protective Holder for Most TI Series Gauges
V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)
SB4 4 Step Steel Test Block, 0.1 / 0.2 / 0.4 / 0.6 inch - Uncertified
CF12 Coupling Fluid - 12oz
CF-4H High Temp Coupling Fluid 4oz (0 - 600 F / -18 to 316 C)
CF-4H-950F High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C)
T-102-3300 1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25DL)
T-102-2000 1/4" diameter, 5.00 MHz, dual element transducer
T-102-1000 1/4" diameter, 2.25 MHz, dual element transducer
T-104-1000 1/2" diameter, 2.25 MHz dual element transducer
T-044-2000 1/2" 5.0 MHz Hi-Temp (650 F / 344 C) Transducer
T-104-2000 1/2" diameter, 5.00 MHz dual element transducer
T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit
订货型号
TI-25DL Data Logging Ultrasonic Wall Thickness Gauge Kit with T-102-3300 Probe
TI-25DL-H Data Logging Ultrasonic Wall Thickness Gauge kit with High-Temp (650 F / 344 C) T-044-2000 Probe, CF4H High Temp Coupling Fluid Highly Recommended
TI-25DL-107 Data Logging Ultrasonic Wall Thickness Gauge kit with T-104-1000 probe for Cast Iron and Plastics
TI-25DL-HW Data Logging Ultrasonic Wall Thickness Gauge kit with T-104-2000 probe for Thick Walls
TI-25DL-WOP Data Logging Ultrasonic Wall Thickness Gauge WITHOUT PROBE
相关型号
SB4
SB-Series
TICC-M
CF-12
TI-25-UM-50
V-Block
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
物流技术网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
