产品应用
应用行业：日用品(垃圾桶、卡板)汽配(保险柜、门板)、叠卡板等行业。
应用工艺：产品成型完成后的取放。
应用效果：应用于快速取出或是多样的取出应用，特别是长形状的重型产品，如汽车保险杠、门饰条、大型家电外壳等。
T系列 适用于50T-4000T
T系列机械手臂用于200-4000吨的各型塑胶卧式射出成型机,3轴~5轴AC伺服驱动,
同时取出产品及水口，上下手臂结构分：单、双截式,T系列机械手臂适用于高精度，
高速度的取出与埋入，响应速度快，定位精度高，应用于快速取出或多样的取出与埋入应用。
T系列配置和用途:
YUBAO大型伺服横行式机械手臂T系列；主要应用在400-4000ton的各型卧式成型机。各轴驱动使用高性能的AC伺服马达驱动，，具备超高速的取出时间1.5秒、全循环时间在12秒以内，高定位精度重现性达∮0.15mm，程序具有可教导性，可依据动作需求弹性的设定动作，具备高性能的取出特性。应用在成型周期短的各项产品取出应用，或是应用在较复杂的自动化场合。
有 YBT800~YBT3000机型，手臂型式有：单/双节型，并可以增加副臂用于三板模的应用，上下行程在800~3000mm。超快速的取出大幅提高生产效率。 Yu leopard type intelligent servo horizontal large mechanical arm T series is mainly used in the 400-4000 ton of each model horizontal molding machine. Each shaft driven using a high performance AC servo motor drive, with ultra-high speed of take out time of 1.5 seconds, the whole cycle time within 12 seconds, high positioning accuracy repeatability of 30 mm, 0.15 program is to teach, it can be set according to the action of the elasticity of demａnd action, have to take out the characteristics of high performance. Application in various products molding cycle is short of, or used in more complex automation. Have YBT800~YBT3000 models, for double cross arm type and can increase pair of arm used in three board application, up and down stroke in 1300 ~ 3000 mm. Super fast take out greatly increased production efficiency. |
T系列机构特点
采用高性能AC伺服马达驱动，可取出成品深度大之产品，取出产品多样化；超高速的取出时间大幅提升生产的效率。
高刚性3D结构设计，结构稳定震动小耐久寿命长。 使用高精度高速专用的直线滑轨，耐磨损、耐热、寿命长不变形。 手臂结构采用高刚性铝挤型梁，质量轻、高刚性，配合皮带倍速机构保证取出时间。 T型齿型钢丝PU皮带传动，稳定性佳，定位精确重现性达∮0.15mm。 T2000型以上为重荷重型设计，可荷重50Kg以上，T3000型更可以荷重120Kg，用于超大型产品的取出。 diversification; Super fast take out time to boost the efficiency of production. High rigid 3 d structure design, stable structure vibration endurance life long. Dedicated linear slide rail with high precision high speed and wear resistance, heat resistance, long service life without deformation. Use high rigid extruded aluminum beam arm structure, light weight, high rigidity, cooperate to belt out times speed institutions guarantee time. T type tooth type wire PU belt transmission, stability, high precision positioning repeatability of 30 0.15 mm. Over T2000 type designs for the burden of heavy, can load more than 50 kg, type T3000 can load 120 kg more, take out for very large products. |
