津市市石油化工仪器有限公司
津市市石油化工仪器有限公司
产品型号：JSH1201产品名称：润滑油抗氧化安定性测定器(JSH1201)产品说明：JSH1201润滑油抗氧化安定性测定器一、符合SH/T0196标准二、主要技术参数：控温范围：常温～125℃控温精度：±0
产品型号：JSH1201
产品名称：润滑油抗氧化安定性测定器(JSH1201)
产品说明：
JSH1201润滑油抗氧化安定性测定器
一、符合SH/T0196标准
二、主要技术参数：
控温范围：常温～125℃
控温精度：±0.5℃
控温方式：数显温控仪控温
加热方式：电热管加热
加热功率：2KW
搅拌方式：电机搅拌
试样孔数：8孔
流量控制：氧气流量计 （0～400mL 4只）
空气流量计 （0～100mL 4只）
工作电源：AC220V±10％ 50HZ
三、性能特点：
1、采用进口温控器控温，数显直观，控温精度高；
2、采用快速接头与进气嘴连接，装卸方便；
3、采用不锈钢油浴，电热管加热，升温速度快，搅拌均匀。并装有超温自保装置，使用安全可靠；
4、采用数显时间计时器计时，显示直观，走时准确，并能根据时间设置定时报警；
5、仪器设计4路氧气通道和4 路空气通道，可分别控制其流量大小，并可同时做8个样。
JSH1201 lubricating oil anti-oxidation stability tester
I. It conforms to SH/T0196 standard
Ii. Main Technical parameters:
Temperature control range: normal temperature ~ 125℃
Temperature control accuracy: ±0.5℃
Temperature control: Digital display temperature controller
Heating mode: Electric heat pipe heating
Heating power: 2KW
Stirring mode: motor stirring
Number of sample holes: 8
Flow control: Oxygen flowmeter (0 ~ 400mL 4 PCS)
Air flowmeter (0 ~ 100mL 4 PCS)
Power supply: AC220V± 10% 50HZ
Iii. Performance Characteristics:
1. Imported temperature controller is used to control temperature, with intuitive digital display and high temperature control accuracy;
2. Adopt quick joint to connect with air inlet, easy to load and unload;
3, the use of stainless steel oil bath, electric heat pipe heating, heating speed is fast, uniform stirring. And equipped with over-temperature self-protection device, safe and reliable use;
4. Digital display time timer is used for timing, intuitive display, accurate travel time, and timing alarm can be set according to the time;
5. The instrument is designed with 4 oxygen channels and 4 air channels, which can control the flow rate respectively and make 8 samples at the same time.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
物流技术网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
