
产品型号:JSR2901
产品名称:闭口(闪点),石油产品闭口闪点测定器(马丁闭口杯法) (JSR2901)
产品说明:
JSR2901石油产品闭口闪点测定器(马丁闭口杯法)
一、符合GB/T261、ASTM D93、ISO2719标准
二、主要技术参数:
加热功率:0~300W 可调
搅拌方式:电动搅拌(A、B双速转换)
点火方式:手动点火
工作电源:AC220V±10% 50HZ
三、性能及特点:
1、加热采用电子固态调压方式,电压由0~220V任意调节,由一个电位器控制,可无级调节加热功率,操作维修十分方便;
2、搅拌由电机进行搅拌,并设有双速A、B转换。
3、采用风冷方式对试验完毕后的油样进行冷却;
4、装有电加热器保护装置,当油杯放到电加热器上时电加热器自动通电开始加热,将油杯拿开后自动切断电加热器电源而停止加热。
JSR2901 petroleum products closed flash point tester (Martin closed cup method)
I. Comply with GB/T261, ASTM D93, ISO2719 standards
Ii. Main Technical parameters:
Heating power: adjustable from 0 ~ 300W
Stirring method: electric stirring (two-speed conversion between A and B)
Ignition mode: manual ignition
Power supply: AC220V±10% 50HZ
Iii. Performance and Characteristics:
1. Electronic solid-state voltage regulation is adopted for heating. The voltage is adjusted arbitrarily by 0~220V and controlled by a potentiometer.
2. Stirring is carried out by motor, and is equipped with two-speed A and B conversion.
3. Air-cooled the oil samples after the test;
4. The electric heater protection device is installed. When the oil cup is put on the electric heater, the electric heater will be electrified and heated automatically.