ICS-30 Electronic Belt Scale: the dynamic accumulative error of the ics-30 series electronic belt scale of weikec is ≤±1%, which is suitable for the occasions where the precision requirement is not high and the installation requirement is simple, which can provide the instantaneous flow rate and accumulative amount for the process control and output monitoring of the product production. System composition and weighing bridge: the ics-30 series belt scale is mainly composed of four parts: ics-30 suspension type weighing bridge (idler optional), shear beam type weighing sensor,60-12c speed measuring sensor, wtc2001 type integrator. Power:220VAC,50HZ Power:50W Using single roller ICS-30 weighing bridge frame, no lever, full suspension structure design, stable and reliable, the structure design with chain code calibration is basically close to the physical calibration value, completely closed, moisture-proof, dust-proof, anticorrosion and reduce material accumulation, no use of knife edge device and bearing device caused by zero instability and so on. Single piece structure, no moving parts, easy installation, no maintenance. Weighing and Speed Measuring Sensors: Shear beam type electronic strain sensor, specially designed strain compensation. Specific technical parameters are as follows: Shell: Sealed protection non-linear: