主要技术参数：
系统精度：±0.25% 称重范围：1~2500t/h
皮带宽度：500~2400mm 皮带速度：0~4m/s
皮带输送机倾角：<6°(特殊物料≤10°)
电源电压：220Vac（-15%~+10%）50Hz±2
环境温度：仪表-10℃--50℃，机械-35℃--65℃；
ICS-14- 4 electronic belt scale:
WEIGHTEC ICS- 14 high-precision electronic belt scale, with full suspension weighing bridge, digital signal transmission and processing technology, the dynamic cumulative error is far less than ±0.25%. Can reach ±0.125%, suitable for internal, external settlement or other high-precision symmetrical occasions.
System composition:
ICS- 14 electronic belt scale mainly consists of four parts: ICS- 14 weighing bridge (optional roller), S-type weighing sensor, 60-12C speed sensor and speed roller, imported MT2301 and MT2301D or WTC2001 integrator. Power: 220VAC, 50H power: 50W
weighing bridge: ICS- 14 weighing bridge for four groups of weighing rollers, full suspension structure, no ear shaft fulcrum and moving parts. Using rectangular steel pipe design, the whole weighing bridge has enough rigidity, small self-weight, and the surface area of ash deposit is the lowest. The high-precision resistance strain gauge sensor is installed in the drawing position to reduce the non-linear error. To ensure the stability of the whole system, its maintenance is very small. The two beams are supported by a symmetrical bridge with four pull-type weighing sensors. Weighing bridge is a unit component structure, it can be installed on site conveniently and quickly, and only eight bolts are required to be installed and fixed.
Weighing sensors:
WEIGHTEC ICS-14,ICS-17,ICS-20 series of electronic belt scales are drawn-type electronic strain gauge weighing sensors.
The main technologies are as follows:
housing: "S" seal protection, non-linear: < 0.03%FS, non-repeatability: 0.01%FS, creep < 0.02%FS, zero output: ±1% at maximum flow rate, Sensor elastomeric displacement is not greater than 0.2mm humidity sensitivity: interval: 0.0008%FS/OF zero: 0.0015%FS/OF, lag error: 0.02%, sensitivity error: ±0 .01%, overload capacity: 150%
speed sensor of sensor capacity: main technical parameters: system precision: ±0.25% weighing range: 1-2500t / h ,Belt width: 500~2400mm ,belt speed: 0~4m/s, belt conveyor angle: < 6 °(special material ≤ 10 °), power supply voltage: 220Vac (- 15% ~ 10%) ,50Hz ±2 ,ambient temperature: instrument-10 ℃-50 ℃, Mechanical-35 ℃-65 ℃;
