室外机组技术数据 Technical Data of External Unit |
|
机组型号 Model | CRXL-079EA | CRXL-114EA | CRXL-136EA | CRXL-160EA | CRXL-188EA |
名义输入功率① Nominal Input(W) | 790 | 1140 | 1360 | 1600 | 1880 |
电源 Power Supply | 1PH 220~240V 50Hz |
冷媒 Refrigerant | R22 |
充注量 Refrigerant Max.(Kg) | 1.5 | 2.0 | 3.0 | 3.0 | 3.5 |
启动电流 Start-Up Current (A) | 25 | 30 | 40 | 42 | 51 |
运行电流② Max Running Current (A) | 4.3 | 6.1 | 7.6 | 8.7 | 13.6 |
蒸发温度范围 Evap.Temp(℃) | -40~-5 |
环境温度范围 Ambient Temp(℃) | 0~43℃(当环境温度低于10℃时,需要增加冷凝温度控制) (The environmental temperature under 10℃, Increase the condensation temperature control) |
压缩机(型号) Compressor(Model) | QXL-16E | QXL-23E | QXL-30E | QXL-36E | QXL-41E |
压力控制器 Pressure Controller | BLPS-YK-M(2.7 OFF 2.2 ON) BLPS-YK-L(0.035 OFF 0.2 ON) |
电磁阀 Solenoid Valve | 3/8″ |
交流接触器 AC Contactor | 有 |
油压表 Oil Gauge | 有 |
冷凝器 Condebser | 风扇电机 Fam Motor | 风扇直径*数量(mm) Diameter Quantity | φ400*1 | φ400*1 | φ420*1 | φ420*1 | φ450*1 |
风量(m3/hr) Air Flow | 2200 | 2200 | 2800 | 2800 | 3800 |
接管(mm) Pipe | 吸气口(直径) Gas Inlet Diam | 1/2截止阀 | 1/2截止阀 | 5/8截止阀 | 5/8截止阀 | 5/8截止阀 |
排气口(直径) Liquid Outlet | 3/8截止阀 | 3/8截止阀 | 3/8截止阀 | 3/8截止阀 | 3/8截止阀 |
外形尺寸 (mm) Out Dimension | 长(mm) Length | 760 | 850 | 865 |
宽(mm) Width | 320 | 345 | 375 |
高(mm) Height | 530 | 580 | 710 |
安装尺寸(mm) Installation dimension | 535*290 | 500*315 | 630*345 |
成品重量(Kg) Weight | 29.5 | 35.5 | 47 | 49 | 55.5 |
制冷量(W) Capacity | 蒸发温度(℃) Evap Temp | 环境温度 Ambient Temp:32℃ |
-40 | 580 | 782 | 1104 | 1150 | 1309 |
-30 | 754 | 1016 | 1386 | 1476 | 1682 |
-25 | 874 | 1141 | 1659 | 1868 | 2129 |
-20 | 1107 | 1440 | 2024 | 2355 | 2685 |
-15 | 1316 | 1739 | 2396 | 2806 | 3202 |
-10 | 1569 | 1960 | 2714 | 3220 | 3671 |
-5 | 1866 | 2263 | 3275 | 3892 | 7736 |
接线容量 Wiring Capacity | 漏电保护器 Leak Protector | 额定电流(A) Rated Current | 15 | 20 | 20 | 20 | 20 |
泄漏电流(mA) Leak Current | 30 | 30 | 30 | 30 | 30 |
线径(mm2) Diameter | L≤10m | 2.0 | 2.0 | 4.0 | 4.0 | 4.0 |
10<L≤20m | 2.5 | 2.5 | 6.0 | 6.0 | 6.0 |
20<L≤30m | 2.5 | 2.5 | 6.0 | 6.0 | 6.0 |
注:①表示名义制冷量的测试工况;②表示运行电流的测试工况。 ①Refrigerating capacity test condition;②The biggest running current test condition。 |
|
测试工况(GB/T 21363-2008) TEST CONDITION: |
|
编号 | 试验条件 TEST CATION | 环境温度 AMBIENT TEMP. | 吸气温度 RETURN GAS TEMP. | 蒸发温度 EVAP. TEMP. | 试验电源 TESTING POWER SUPPLY |
|
① | 名义工况 Standard test conditions | 32.2℃ | 5℃ | -23℃ | 220V~50HZ |
|
② | 运行 OVERLOAD RUNNING | 43℃ | 5℃ | -23℃ | 220V~50HZ |
|