ALR-9680美国意联科技 Alien超高频UHF RFID固定式读写器 读卡器ALR-9680

ALR-9680

Commercial 4-Port RFID Reader

Benefi t Enabled By: What does this mean to me?

Ease of Use • Four antenna port fl exibility

ALR-9680

Commercial 4-Port RFID Reader

Benefi t Enabled By: What does this mean to me?

Ease of Use • Four antenna port fl exibility

• Alien Reader Protocol

• Smart reader/autonomous mode

• Alien Reader Control Architecture & Ruby

• Power-over-Ethernet (PoE)

• Remote fi rmware management

• Easy to set up and deploy

• No additional costly controllers

• Less maintenance and overhead

• Minimizes network infrastructure

• Can be set up in areas with no power

Low set-up and low-running

cost

Robust yet fi ts narrow vertical

locations

• Robust metal chassis

• 1¼“ tall

• All cables on single side

Usable in:

• Physically restricted locations

• Locations with limited cabling

• EPC Gen 2 dense reader interoperable

• Slim form-factor for installation in height-restricted places

• Manageable and upgradable

FEATURES

Simple, Low Profi le, Gen 2 RFID Solution

With Power-Over Ethernet (POE) and out-of-the-box software

compatibility with other Alien readers, the ALR-9680 Gen 2

RFID Reader is a simple, low profi le solution that enables

users to start reading tags and developing solutions

immediay.

Easy to Integrate

The ALR-9680 communicates via the easy-to-use Alien Reader

Protocol, with key RFID platform support including Microsoft®

BizTalk RFID, OatSystems, Oracle®, Xterprise and others.

A well-documented SDK featuring .NET, Java and Ruby libraries

enables easy development of custom interfaces to control

the reader if desired. The user friendly Alien RFID Gateway

software enables the user to begin solution development

immediay.

Low System Cost

The cost of installing AC power can sometimes rival the cost

of the reader. The ALR-9680’s POE capability allows power

to be delivered over properly-equipped local area networks,

eliminating expensive AC wiring installation. A POE power

injector is provided to supply power if POE is not available. The

combination of this capability with up to 4 antenna signifi cantly

reduces the cost and complexity of installing an RFID read

point.

Developers Kit

Developer Kits come complete with all the essentials to get

you started:

• ALR-9680 reader

• A circular polarized antenna

• Software Developers Kit (SDK) (via download)

• Universal power supply

• RS-232 cable

• Ethernet cable

• Sample tags

• Convenient carrying case

Alien

Model Number ALR-9680

Supported RFID Tag

Protocols

EPC Gen 2; ISO 18000-6c

Reader Protocol Alien Reader Protocol, fi rmware upgradable

LAN Protocols TCP/IP, NTP, DNS, DHCP, SNMP

Dense Reader

Management

Dense Reader Mode, Auto event triggering and event management

Frequency 902.75 MHz – 927.25 MHz

Channels 50

Channel Spacing 500 KHz

RF Power Max; 4 watts EIRP with internal antenna

Power 24 VDC supplied via an AC/DC power converter or POE (IEEE 802.3af).

Unit ships with a Power Sourcing Equipment (PSE) module

Communications LAN TCPI/IP (RJ-45), RS-232 (DB-9 F)

Antennas Four with RTNC connector

General Purpose Inputs/

Outputs

2 inputs, 2 outputs, TTL compatible

Dimensions (L) 7 1/4” x (W) 9 1/2” x (D) 1 1/4” without mounting fl ange

(L) 18.41 cm x (W) 24.13 cm x (D) 3.17cm

(W) 10 5/8” / 27cm with mounting fl ange

Weight 2lbs (0.91 kg)

Operating Temperature -20°C to +70°C (-4°F to +158°F)

LED Indicators Power, LAN Link, LAN Active, RF On, Read, Fault

Software SDK Java, .NET, Ruby APIs

Vibration MIL STD 810

514.5C-3 Composite wheeled vehicle profi le

Shock 40 G’s Acceleration, 11 ms duration, sawtooth waveform

Compliance Certifi cation Emissions: FCC Part 15

Safety: cTUVus tested to: CAN/CSA–C22.2 No.60950-1-03, and

UL 60950-1:2007 specifi cations

IEC 60950-1 and EN60950-1