产品型号：JSR0105
产品名称：全自动汽油氧化安定性测定器(触摸屏)JSR0105
产品说明：
JSR0105 全自动汽油氧化安定性测定器(诱导期法)
一、符合GB/T8018、ASTM D525、ISO7536标准
二、主要技术参数：
热 浴：金属浴
加热温度：100±0.1℃
加热功率：1.5 kw
氧 弹：符合GB/T8018标准
温度控制：采用进口温控器控制
工作单元：二支氧弹
工作电源：AC220V±10％ 50HZ
三、性能及特点：
1、仪器采用单片机控制，在试验过程中，能自动记录压力及其变化过程，并用曲线的方式描绘出来，在试验完毕后，能自动判别转折点；
2、试验过程中，整个充、放气过程由系统自动完成，所充的压力可由屏幕显示的画面直接反应出来，在充、放气完毕后，系统能自动判别是否泄漏；
3、在试验过程中，用户可根据需要选择做单个或平行样，做单个试样时，可循环试验，并可在转折点出来后分别打印结果；
4、仪器可贮存近期内的64个油样，并以菜单的方式列出时间、操作者编号及油样编号等项，用户可根据自己的需求进行查询；
5、采用金属浴或油浴，克服了大气压给温度带来的影响。在试验完毕后，能自动关闭加热系统，节约能源；
6、改进了氧弹结构，用球阀代替针阀，减少磨损，提高了阀门的使用寿命；
7、仪器在试验前或试验过程中，若温度不在标准范围内，将会用声音报警，提醒用户此时的温度状况；
8、仪器在断电后再次恢复运行时，可根据屏幕提示按异常中止程序自动恢复，为操作者提供方便，节省时间；
9、在试验完毕或在查询过程中，用户可根据需要打印结果。
JSR0105 automatic gasoline oxidation stability tester (induction period method)
I. Comply with GB/T8018, ASTM D525, ISO7536 standards
Ii. Main Technical parameters:
Hot bath: Metal bath
Heating temperature: 100±0.1℃
Heating power: 1.5KW
Oxygen bomb: conform to GB/T8018 standard
Temperature control: controlled by imported thermostat
Unit of work: two oxygen bombs
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. The instrument is controlled by single chip microcomputer. In the test process, the pressure and its change process can be automatically recorded and depicted by means of curve, and the turning point can be automatically identified after the test is completed;
2. During the test, the whole process of charging and venting is completed automatically by the system, and the pressure can be directly reflected by the screen. After charging and venting, the system can automatically determine whether there is a leak;
3. During the test, users can choose to make single or parallel samples according to their needs. When making a single sample, cyclic tests can be conducted, and the results can be printed separately after the turning point;
4. The instrument can store 64 oil samples in the near future, and list the time, operator number and oil sample number in the form of menu. Users can inquire according to their own needs;
5. Metal bath or oil bath is adopted to overcome the influence of atmospheric pressure on temperature. After the test, the heating system can be shut down automatically to save energy.
6. The oxygen bomb structure is improved and the ball valve is used to replace the needle valve to reduce wear and improve the service life of the valve;
7. If the temperature of the instrument is not within the standard range before or during the test, it will sound an alarm to remind the user of the temperature condition at this time;
8. When the instrument resumes operation again after power failure, it can be automatically restored according to the screen prompt and according to the abnormal abort procedure, to provide convenience for the operator and save time;
9. After the test or during the query process, the user can print the results as required.
