-
DWT-I型玻璃钢轴流式屋顶通风机
DWT-I型玻璃钢轴流屋顶通风机广泛适用于中低压、大流量的使用场所。如工矿企业、车间、仓库、体育馆、影剧院、发电厂、化验室、橡胶厂、汽车厂、摩托车厂及纺织、冶金等场所通风换气使用。本系列风机具有造型美观，结构紧凑、强度高、重量轻、耐腐蚀、抗老化、耗电省、噪音低、运转可靠、经济实用、安装维修方便等特点。其所输送气体不允许含有粘性物质、所含粉尘及硬质颗粒≤150mg/m3、气体温度≤60℃、相对湿度≤99%。 -
DWT-I series of axial fiber glass roof fan
The DWT-I type FRP axial flow roof fan is widely used in medium and low pressure and large flow use places. Such as industrial and mining enterprises, workshops, warehouses, gymnasiums, theaters, power plants, laboratory, rubber factories, auto factories, motorcycle factories, textile and metallurgy places, etc. This series of fans is characterized by beautiful appearance, compact structure, high strength, light weight, corrosion resistance, anti-aging, low power consumption, low noise, reliable operation, economical and practical, convenient installation and maintenance. The gas is not allowed to contain viscous substances, dust and hard particles is less than or equal to 150mg/m3, the gas temperature are less than 60, the relative humidity is less than 99%.
| 机 号 Model(No) | ||||
|---|---|---|---|---|
| 功 率 Power(Kw) | 转 速 Speed(r/min) | 流 量 Volume(M3/h) | 全 压 Pressure(Pa) | |
| 3 | 0.37 | 2900 | 3300-2600 | 181-232 |
| 0.18 | 1450 | 1900-2120 | 90-110 | |
| 3.5 | 0.75 | 2900 | 4150-5320 | 150-230 |
| 0.37 | 1450 | 3320-2850 | 100-150 | |
| 4 | 1.1 | 2900 | 7450-5300 | 193-250 |
| 0.55 | 1450 | 5700-4580 | 176-190 | |
| 4.5 | 0.55 | 1450 | 6320-5800 | 125-140 |
| 0.37 | 1450 | 6067-5520 | 110-130 | |
| 5 | 0.55 | 1450 | 8000-5600 | 135-191 |
| 0.37 | 960 | 7000-6400 | 113-131 | |
| 6 | 1.5 | 1450 | 15000-13000 | 232-267 |
| 1.1 | 960 | 11000-9100 | 168-193 | |
| 0.55 | 710 | 8500-7600 | 111-136 | |
| 7 | 1.1 | 960 | 17500-12500 | 165-212 |
| 0.75 | 710 | 12000-9200 | 141-177 | |
| 8 | 2.2 | 960 | 27000-23000 | 175-228 |
| 1.5 | 710 | 20000-16000 | 129-167 | |
| 9 | 4 | 960 | 34500-24000 | 256-202 |
| 2.2 | 710 | 32000-24000 | 126-177 | |
| 10 | 5.5 | 960 | 50000-39000 | 251-317 |
| 3 | 710 | 46000-35000 | 141-183 | |
| 11.2 | 7.5 | 960 | 41000-53855 | 215-285 |
外形及安装尺寸示意图 Lnstallation size diagram
产品为人工实物测量会有一定误差，相关数据仅作参考，以收到的实物为准。 单位Unit: mm(毫米）
| 机号 | |||||||
|---|---|---|---|---|---|---|---|
| 外形尺寸 | |||||||
| NO | ΦA | ΦB | C | D | E | F | H |
| 3 | 667 | 305 | 300 | 550 | 500 | 485 | 68 |
| 3.5 | 970 | 360 | 340 | 610 | 560 | 520 | 68 |
| 4 | 970 | 400 | 350 | 620 | 660 | 610 | 68 |
| 4.5 | 1143 | 460 | 400 | 695 | 700 | 660 | 68 |
| 5 | 1143 | 488 | 440 | 740 | 750 | 710 | 68 |
| 6 | 1280 | 580 | 510 | 820 | 840 | 825 | 68 |
| 7 | 1280 | 710 | 520 | 836 | 900 | 860 | 68 |
| 8 | 1410 | 800 | 560 | 950 | 1000 | 940 | 68 |
| 9 | 1760 | 910 | 620 | 1000 | 1260 | 1210 | 68 |
| 10 | 1760 | 1010 | 730 | 1150 | 1310 | 1250 | 68 |
| 11.2 | 1760 | 1120 | 730 | 1200 | 1450 | 1350 | 68 |
