产品详情 Production Description：
• In low pressure compressed air（75psi）as the power to control the operation of the cylinder through the super pressure fluid valve body off, there are normally open and normally closed in two forms.
以低压压缩空气（75psi）为动力推动气缸来控制阀体内超高压流体的通断，有常开和常闭两种形式。
• According to the valve port location. There are 6 kinds of forms, to meet a variety of connection.
按阀体连接端口位置形式共有6种，满足了各种连接需要。
• The maximum working pressure can reach 60,000psi（4140Bar）.
工作压力可达到60,000psi（4140Bar）。
• Can provide with position sensing products:HI type, convenient remote control.
可提供带开关位置感应的产品：HI型，方便远程控制。
• At ambient temperature range:-25℃~65℃（-13℉~149℉）.
环境温度范围：-25℃~65℃（-13℉~149℉）。
• Working medium: oil, gas, water.
工作介质：气体、油品、水。
• The valve body material by 316 and the valve seal valve needle hard with using 17-4PH or hard alloy, wearresistance, long service life, to meet a variety of conditions.
阀体采用316材料，与之阀口配合硬密封阀针采用17-4PH或硬质合金，耐磨损，寿命长，满足各种工况。
左图：常闭气控阀 右图：常开气控阀
Remark: If you need other working medium or high/low pressure product, please do not hesitete to contact us, our technical will send you the perfect proposal base on your request.
注：如需要其它温度、介质的产品，请联系我们，由我们专业的技术人员精心设计，满足您的要求。
型号说明 Model Description：
常闭（NC）选型及尺寸 NC Type and size：
常开（NO）选型及尺寸 NO Type and size：
