YCM-U型上袋机
- 该系统可适用于纸袋、塑料袋等各种包装材料 , 在化工、饲料、粮食等行业被广泛使用。
- 可进行 20-50kg 的袋包装，具有 200-400 袋 / 小时的能力。
- 自动给袋装置适应高速连续作业。
- 各执行单元均设有控制和安全装置，实现自动连续运转。
- 采用 SEW 马达驱动装置，可发挥更高效能。
Bag Supplying Machine
- The equipment is widely applied in chemical industry, feed, grain, and other Industries with paper bag, plastic bag, etc.
- The equipment's filling weight is about 20-50kg each bag, and can supply about 200-400 bags/h.
- Automatic supplying bags can be high-speed and continuous.
- Every execution unit includes control & safety device to make the equipment run automatically and continuously.
- The motor manufactured by SEW make the equipment more efficient.
| 型号规格 Model | YCM-U |
| 包装能力 Capacity | 200-400 bags/ h(根据物料会有所不同) |
| 填充方式 Filling Mode | 1 发 / 1 袋填充 |
| 包装物料 Applicable Material | 颗粒、片状 granular/ flaky |
| 填充重量 Filling Weight | 20-50 kg/ bag |
| 包装袋材料 Bag Type | a. 纸袋 paper bag b. 塑料袋 plastic bag(膜厚 0.18-0.25mm) |
| 包装袋尺寸 Bag Size | 长 L(mm) 580-640 宽 W(mm) 300-420 底宽 H(mm) 75-150 |
| 耗气量 Air Consumption | 750 NL/ min |
| 总功率 Power | 3 kW |
| 重量 Weight | 1300 kg |
| 外形尺寸 Overall Dimensions(L*W*H) | 6450×2230×2160 mm |
| 封口方式 Seal Method | 纸袋 : 缝纫 / 热熔胶带 / 皱纹纸 paper bag: sewing/ hot glue tape / creped paper 塑料袋：热合 plastic bag: heat seal |
工作流程
-
自动供袋机
Bag Supplying Machine2个水平排列的置袋盘约可存放200个空袋(存放量会因空袋的厚度而异)，由吸盘取袋装置给设备供袋。当一个单元的空袋取完后，下一单元的置袋盘自动切换至取袋位置，以设备的连续运转。
About 200 empty bags are put in 2 horizontal plates (the number of empty bags depends on the bag thickness), and bag supplying is finished by vacuum chuck. After one empty bag taken, the plate with many empty bags moves to the bag fetch position so that the equipment can run continuously and stably.
-
空袋提取
Take Empty Bag提取自动供袋机上空袋。
Take the empty bag of Bag Supplying Machine.
-
空袋打开
Open Empty Bag空袋移动至下料口位置后，由真空吸盘打开袋口。
Move the empty bag to feed opening, then open the pocket mouth of bag with vacuum chuck.
-
夹袋喂料装置
Bag Clamping and Feeding Mechanism空袋由夹袋机构夹紧在下料口，下料门插入袋内后打开喂料。
The empty bag is clamped by Bag Clamping Mechanism under the feed opening, then feeding door insert to the bag and start the feeding.
-
袋底拍击装置
Bag Bottom Flapping Mechanism物料充填后，此装置拍击袋底，使袋中的物料充分落实。
After the materials filled the bag, the mechanism claps the bottom of bag to make materials fully drop down the bottom of bag.
-
实袋横向移动和袋口夹持导入装置
Bag Horizontal Moving & Pocket Mouth Clamping Mechanism实袋从下料口放至立袋输送机上，并由袋口夹持装置夹持着袋口输送到封口部分。
The bag with materials is put on the Standing Bag Conveyor from feed opening, and clamped by the Pocket Mouth Clamping Mechanism until get to the sealing part.
-
立袋输送机
Standing Bag Conveyor实袋由此输送机以恒定的速度输送到下游，高度调节手柄可调整输送机的高度。
The bag with materials is conveyed at the same speed, and the conveyor height can be changed with height regulating handle.
