3299
Specifications
Design Features
Services
Hydraulic Coverage
Product Views
Model Features
The 3299 is designed specifically to handle corrosives that require the universal corrosion resistance of PFA Teflon® . As a sealless design, it's an effective alternative to pumps with mechanical seal problems. Meets strictest EPA regulations.
The standard frame mounted configuration provides rugged dependable service for the most severe applications.
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
- Product Bulletin
- Installation Operation and Maintenance Manual (IOM)
- Capacities to 425 GPM (95 m 3 /h)
- Heads to 490 feet (150 m)
- Temperatures to 360° F (180° C)
- Pressures to 275 PSIG (19 bar)
- Extended Pump Life
- Virgin Teflon® (PFA) Construction, PVDF
- Sealless Design
- PFA Lined Solid 316 Stainless Steel Shaft
- DryguardTM Bearings
- Non-slip Synchronous Drive with Neodymium Iron Boron Outer Magnets and Samarium Cobalt Inner Magnets
- Optional Samarium Cobalt Outer Magnets
- Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps
- Minimum Parts
- ANSI Dimensional
- Optional Close-Coupled Design
- No Mechanical Seal
- Drive Magnet Assembly Bump Ring
- Adapter Drain Connection
- Optional Casing Drain
- Zero Emissions
- Hot Acids
- Nitric Acid
- Acetic Acid
- Amines
- Chlorinated Solvents
- Carbon Tetrachloride
- Chloroform
- Dichloroehtylene
- Freon 113
- Ethers
- Acetone
- Bromine
1450 - 1750 RPM
2900 - 3500 RPM
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Product Cutaway
Modular Interchangeability
Parts List
Product Dimensions
Modular Interchangeability
Parts List
Product Dimensions
PFA Construction for Universal Corrosion Resistance to 360°F (180°C)
Zero Leakage on Hard to Seal Hot Corrosives
Designed for Safe Operation
Dry Run Capability
Design Features for Extended Pump Life
Installation Flexibility
Fully Confined PTFE Casing Gasket
Solids Handling
High Pressure Capability
Zero Leakage on Hard to Seal Hot Corrosives
Designed for Safe Operation
Dry Run Capability
Design Features for Extended Pump Life
Installation Flexibility
Fully Confined PTFE Casing Gasket
Solids Handling
High Pressure Capability
Find Sales & Service
- Worldwide Sales and Service Contacts
