SCZ50-2D伸缩臂吊装机
（escopic Crane Loader）
[ 产品简介 Product Introduction ]
SCZ50-2D型伸缩臂吊装机，底盘采用前轮驱动，后轮转向，刚性悬挂；传动采用前后各两档液力机械传动变速箱，全液压动力转向，制动为气推油钳盘式制动；工作装置为两节四边形伸缩臂和一个可旋转吊臂组成。该机于进集装箱石板材的吊装作业，也可作为一般吊车使用，可广泛适用于工厂、码头、货场、林场、建材、仓库、物流等行业，是一种适应性广和效率高的装卸机械。
The SCZ50-2D escopic Crane Loader works with front-wheel drive, rear-wheel steering, rigid suspension; adopt total four hydromechanical drive gear-boxes in the back and front as the transmission, hydraulic power steering, caliper disc brake; the working device is composed of two quadrilateral portable escopic arms and a rotary boom. It is specially used for lift on/off the stone slab container and it can also be used as a normal crane. It is widely available for the factory, dock, goods yard, forestry center, building materials industry, warehouse, logistics and so on. It is a handling machinery of wide application and high efficiency.
[ 主要技术参数 Specifications ]
| 额定起重量 Rated Load | 5000kg | |
| 载荷中心距（轮胎前沿距载荷中心） The Distance of Load Center（Tyre-fore to load center） | 3000mm | |
| 主钩zui大起升高度（主吊钩距地面） Max.Lifting Height of Main Hook（Main hook to ground） | 6250mm | |
| 主钩zui大外伸距（水平）（轮胎前沿距主吊钩） Max.Outspread of Main Hook（Horizontal）（Tyre-fore to main hook） | 2750mm | |
| zui大行驶速度 Max.Traveling Speed | 25km/h | |
| zui小离地间隙 Min.Ground Clearance | 365mm | |
| zui小转弯半径 Min.turning Radius | 6800mm | |
| 爬坡度 Grade Ability | ≥20% | |
| 倾翻角度上/下 The Angle of Lean Up/Down | 24°/22.5° | |
| 轮距 Tread | 1825mm | |
| 轴距 Wheel base | 2998mm | |
| 自重 Deadweight | 13000kg | |
| 整机外形尺寸（长×宽×高） Overall Dimension （L×W×H） | 5400mm×2200mm×2800mm | |
| 发动机（一拖东方红） Engine （Yituo Dongfanghong） | 型号 Type | LR4108G76 |
| 额定功率 Rated power | 74kw | |
| 标定转速 Rated speed | 2400r/min | |
| 排量 Exhaust | 4.6L | |
| 轮胎 Tyre | 前轮 Front wheel | 15.5-25（16PR） |
| 后轮 Rear wheel | 11.00-20（16PR） | |
注：由于技术改进，该数据可能与产品不符，如有误则以产品为准。
Note:The content and performance will be revised and the products will be improve without notice.
