测试账号
免费会员您现在的位置： 测试账号>> 供应矿山输送机 矿石输送设备
具体成交价以合同协议为准产品介绍
- 产品品牌：
- 荣洋
1. 物料容重:γ=0.2-1.8吨/立方米
Material bulk density: γ=0.2-1.8t/m3
2. 温度: 物料温度t＜100度c
Temperature: Material temperature t＜100oC
3. 含水率: 对于一般物料，不得使物料用手捏成团后不易松散，对于含水率认加后会加大粘着性和压给性的物料，不能使物料严重粘附刮版。
Water ratio: For common materials, they should not be easily loose after squeezed into cluster by hand. For the materials that the adhesivity and press-feedbility would increase after add water ration, they should not be adhere to scraper badly.
4. 粒度: 物料的粒度与其硬度有关，粒度太大. 则不宜输送. 对物料粒度的要求见下表。
输送物料的粒度（毫米）
Granularity: The materials’ granularity is related to their rigidity, if the granularity is too high, it is not easy for transporting. The requirement of materials’ granularity is as follows:
输送方式
Transporting method
硬度较低的物料
Materials with low rigidity
硬度较高的物料
Materials with high rigidity
适当的粒度
Proper granularity
zui大允许粒度（不得超过10%）
Biggest allowed granularity（not over 10%）
适当的粒度
Proper granularity
zui大允许粒度（不得超过10%）
Biggest allowed granularity（not over 10%）
水平输送Horizontal transport ＜B/20
＜B/10 ＜B/40 ＜B/20
垂直输送Vertical transport ＜B/30 ＜B/15 ＜B/60 ＜B/30
注:B为输送机槽宽. 输送木片时，zui大粒度可达50%B
Note: B is the width of transporter slot. When transporting wood piece, the biggest granularity can reach 50%B.
相关产品
